agent sidequestsIdeas worth trying

Add one-tap updates to your AI spreadsheet app

Start with one action you would actually use on your phone: mark a project item done, for example. Tell your agent exactly which spreadsheet field that action may change, keep calculated cells read-only, and check the saved row in the workbook. This guide takes a three-item project list from a viewing screen to a proposed, testable edit; it also explains when to keep the app read-only.

Choose where the real record lives

A useful phone interface can save you from pinching and scrolling around a workbook. Adding an edit button creates a second question: does it update the original record, or only a copy? Decide that before asking for the button.

Marco Madonna’s October 6 account describes a family spreadsheet app that later gained writes back to selected source cells while refusing to replace formulas with typed values. It is a first-person portfolio report with fictional screenshot figures; we did not inspect the private app. Our small editing exercise below is an original, untested method.

Choose the behavior before building the interface
VersionWhat a phone action meansChoose it when
Imported snapshotDisplays a particular export; editing it does not update the original workbook.You mainly need to look things up. Label the file and its source date.
Connected viewReads the workbook; changes still happen in the spreadsheet.You want current information without another place to edit it.
Connected editingWrites specific approved fields in that same workbook, then reads them back.One frequent action is worth the additional setup and checks.
Replacement appA new store becomes authoritative; the old sheet becomes an archive or export.You intentionally want a migration. That is a different project from adding a phone view.

Define one useful action on a small copy

Bring a copy of the workbook, the intended phone/browser, the people allowed to edit it, the relevant formulas and a working read-only view. Use invented rows first. Keep the original workbook intact.

For this illustrative exercise, the Tasks tab has three columns: ID, Task and Completed. Completed contains actual Boolean values, not the text “false.” Summary!B2 contains =COUNTIF(Tasks!C2:C4,FALSE), so the starting remaining count is 2. This fixed range is only for the three-row example; adding rows is outside this first change. No app was built or spreadsheet changed for this example.

  • The only new action is Mark done. For P17, it requests Completed = TRUE. It cannot rename tasks, change IDs, delete rows or edit the summary formula.
  • The workbook stays authoritative. The app shows a confirmed value only after checking the saved record; a pending appearance needs a visible pending label.
  • Use an existing unique, permanent item ID. If none exists, agree on adding one to the test copy before enabling writes. Row position and a task’s editable name are not reliable identities. Google’s AppSheet key documentation explains this distinction for its own update behavior.
The complete fictional starting table, with a header in row 1
ID in column ATask in column BCompleted in column C
P17Put up hallway hooksFALSE
P18Touch up the paintFALSE
P19Fit the shelfTRUE

Give your agent an edit contract, not just a button label

Describe the action in terms of the intended result: “Set P17 to done” rather than “flip the checkbox.” A repeated tap should still mean done. Keep the selected item visible while the result is pending so the next item does not move underneath your finger.

Google’s AppSheet formula documentation treats spreadsheet-formula columns as read-only in that product. For your own build, ask the agent to demonstrate the same boundary for the specific formula cells you rely on; do not assume a hidden input on the screen enforces it.

  1. Name the exact workbook, tab, item ID and writable field. Have the agent show the current value, proposed value and the summary that should change.
  2. In the test copy, locate P17 by its unique ID at the time of the update. Refuse missing or duplicate IDs rather than guessing a row.
  3. Require the write path to accept only the approved field and value type. Keep formulas and other fields outside the allowed change, including requests that bypass the normal button.
  4. Apply the authorized test change, then read P17 and the recalculated summary from the source. The expected result is TRUE and 1 remaining; P18 and P19 stay unchanged.
  5. Reopen the phone view and check the same source state. Record which workbook and checks were used. A successful local demonstration is still separate from permission to connect or modify your real workbook.

Work through a second tap, a lost response and a stale screen

Use the cases below to describe how the app should behave. They are proposed acceptance checks, not results we observed. Ask the agent to run them in the authorized test environment and return failures as well as passes.

A quick reread before saving does not eliminate simultaneous-edit races. Google documents that AppSheet can keep the last arriving update when users change the same row, including edits made directly in the spreadsheet. That is a product-specific warning, not evidence that your custom app rejects stale changes.

For a shared editing app, require a demonstrated storage operation that resolves the item identity, checks the expected revision and applies the change together. Looking up an ID and then separately writing to its old cell address still leaves a row-reordering race. If the chosen backend cannot protect the whole operation across every permitted editing path, keep the phone interface read-only or have it prepare changes for one person to apply in the sheet. A client-side timestamp check alone is not that guarantee.

Desired behavior for the first editing action
SituationExpected handlingWhat to inspect
Tap Mark done twice for P17Keep P17 done; do not toggle it back or count it twice.P17 remains TRUE; remaining count is 1; no duplicate completion action.
Save response is lostShow save unconfirmed; read the source before attempting another write.If P17 is already TRUE, record that current state. Do not claim your request caused it without supporting evidence.
Another editor changes the record after it was loadedReject the stale edit where the backend supports this, then ask the reader to review the current state.The newer record survives. If that cannot be demonstrated, do not offer shared editing as conflict-safe.
The rows are reorderedFind P17 by its permanent ID, not its old screen or worksheet position.Only P17 changes; duplicate or missing IDs cause an explicit stop.
A request tries to write Summary!B2Refuse the write even if it is submitted outside the normal screen.The COUNTIF formula remains present; it is not replaced with a typed 1.

Check the source, then test a narrow undo

After the successful fictional P17 change, the expected source state is P17 TRUE, P18 FALSE and P19 TRUE, with 1 remaining. Check both the formula and its calculated result. Seeing 1 on two screens is insufficient if both screens read the same stale cache. If the app cannot obtain a current calculated value, leave that check pending and open the workbook in its spreadsheet application.

A narrow undo would change only P17 back to FALSE, returning the count to 2. Use the same storage operation with an expected revision for the undo: the revision check and correction must happen together, so a newer edit cannot slip between them. Matching the old value alone is insufficient. If that cannot be established, show a proposed correction for review. Do not restore the whole workbook over other people’s newer work.

Jack Stovell’s October dashboard demo reports a backup that omitted activity history; restoration was untested. His development studio sells services. We read the account, not its code or app. Reported tests were local, not on a real phone. A backup file existing is not a demonstrated recovery path.

For your app, test a backup restore into a separate disposable copy before calling it recoverable. Compare the fields and history you actually need. Keep the original and newer work untouched. If you only tested an emulated phone viewport, say so; actual device access and sign-in remain separate checks.

Keep the first version small enough to maintain

The first useful result is one verified action, not a new administrative system. Keep adding and deleting records, offline editing, automatic reminders and changing permissions out of this first pass. Any of those can be a later project with its own evidence.

Ask for the editable app files, the field-to-source map, the exact checks performed and instructions for returning to the read-only version. Use a private test environment already available to you; if none exists, keep a local demonstration with fictional data. A login screen by itself does not prove that data reads and writes are protected. Before using private records, check signed-out access to the data and write paths as well as the screen.

Muse, Instinct, Dots and Grok Bot may offer different file, code, browser and connector capabilities. This workflow has not been tested across them. If your agent cannot implement or inspect the write path, have it return the edit contract and review table for manual use. A working read-only app is a valid stopping point.

A short brief you can adapt

Build on my existing read-only spreadsheet view. In a private test copy with invented rows, add only Mark done for the Completed field. Keep the workbook authoritative, identify rows by a permanent unique ID and preserve every formula. Show the exact old and proposed values before the first test. Demonstrate a repeated tap, an uncertain save, a reordered row and an attempted formula edit. Explain and test how the actual storage handles a stale change; if it cannot reject it reliably, return a proposed-change workflow instead. Read back the saved row and calculated summary, then check reopening and a narrow undo. Return the editable files, source map and honest check report. Connecting to or editing my real workbook needs my separate approval.

Start with the linked spreadsheet-to-phone prompt if you do not yet have the read-only version. Use the linked existing-app feature prompt to scope the small implementation and its test preview. This brief extends those ideas; it is not a tested prompt or a claim that a particular assistant has spreadsheet-write access.

Copy a prompt and try it

Each idea has a complete starter prompt, the inputs to bring, and the tools it needs.

Common questions

Can an AI-built phone app keep my existing spreadsheet?

Yes, a design can leave the workbook authoritative and read or update selected source fields. Ask the agent to distinguish an imported snapshot from a live connection. This guide does not establish that your assistant has the required connection or that its generated app works.

Should I let the app edit formulas?

Keep formula cells out of the first editing action. Change one approved input and let the spreadsheet calculate its dependent results. Inspect the formula itself after the test; the right displayed total can hide a formula replaced with a number.

Is refreshing before saving enough for two people to edit safely?

No. Another edit can arrive between the refresh and the write. Require demonstrated conflict handling at the storage operation, including direct spreadsheet edits, or keep the phone app read-only and review proposed changes in the sheet.

Does this guide replace the read-only spreadsheet prompt?

No. That prompt produces the initial viewing app. This guide addresses a later decision: whether one specific editing action is ready to add. It deliberately leaves migration, offline use and broad editing out of scope.

Sources and further reading

These are practical editorial examples. The prompts have not been independently run-tested across every assistant.

Keep exploring

For platform setup, read the Muse, Instinct, Dots and Grok Bot guides.